nichia sts-da1-3036b nichia corporation specifications for white led NFDWJ130B built-in esd protection device rohs compliant
nichia sts-da1-3036b 1 specifications (1) absolute maximum ratings item symbol absolute maximum rating unit forward current i f 1800 ma pulse forward current i fp 2700 ma allowable reverse current i r 85 ma power dissipation p d 78.3 w operating temperature t opr -40~105 c storage temperature t stg -40~100 c junction temperature t j 140 c * absolute maximum ratings at t c =25c. * i fp conditions with pulse width 10ms and duty cycle 10%. * the operating temperature (t opr ) range is the range of case temperatures. (2) initial electrical/optical characteristics item symbol condition typ max unit forward voltage v f i f =1150ma 40.3 - v luminous flux v i f =1150ma 6980 - lm rnn color rendering index r a i f =1150ma - - - luminous flux v i f =1150ma 6890 - lm r70 color rendering index r a i f =1150ma 73 - - luminous flux v i f =1150ma 6500 - lm r8000 color rendering index r a i f =1150ma 83 - - x - i f =1150ma 0.3447 - - chromaticity coordinate y - i f =1150ma 0.3553 - - thermal resistance r jc - 0.95 1.15 c/w * characteristics at t c =25c. * luminous flux value as per cie 127:2007 standard. * chromaticity coordinates as per cie 1931 chromaticity chart. * r jc is thermal resistance from junction to t c measuring point.
nichia sts-da1-3036b 2 ranks item rank min max unit forward voltage - 38.0 43.5 v g7450 7450 7650 g7250 7250 7450 g7050 7050 7250 g6850 6850 7050 g6650 6650 6850 g6450 6450 6650 g6250 6250 6450 g6050 6050 6250 luminous flux g5850 5850 6050 lm rnn r a - - - r70 r a 70 - - r a 80 - - color rendering index r8000 r 9 0 - - color ranks rank sm503 rank sm573 rank sm653 x 0.3447 0.3287 0.3123 center point y 0.3553 0.3417 0.3282 * ranking at t c =25c. * forward voltage tolerance: 0.37v * luminous flux tolerance: 7% * color rendering index r a toleranc e: 2 * color rendering index r 9 toleranc e: 6 .5 * the r 9 value for the above rank shall be greater than 0. * chromaticity coordinate tolerance: 0.005 * the color rank has a chromaticity range within a 3-step macadam ellipse. * leds from the above ranks will be shipped. the rank combination ratio per sh ipment will be decided by nichia. luminous flux ranks by color ra nk, color rendering index rank ranking by luminous flux ranking by color coordinates, color rendering index g5850 g6050 g6250 g6450 g6650 g6850 g7050 g7250 g7450 rnn r70 sm503 r8000 sm573,sm653 r70
nichia sts-da1-3036b 3 chromaticity diagram 5000k 5700k 6500k 0.25 0.30 0.35 0.40 0.25 0.30 0.35 0.40 x y sm503 sm653 sm573 \?E blackbody locus
nichia sts-da1-3036b 4 outline dimensions k a o protection device sts-da7-5787 nfdxj130b ? no. ( g unit: mm) this product complies with rohs directive. u? rohs ?m??? * ( g unit: mm, tolerance: 0.3) ? item ??`| package materials ??| encapsulating resin materials ?O| electrodes materials | weight description ?? ceramics ?`? ? + w? silicone resin (with diffuser and phosphor) ? au-plated 1.9g(typ) 1 2 max cathode anode k??t 0.3mm 24 19 17 19 22 (14.6) 9.7 (16.6) the center of emitting area to be centered 0.3mm.
nichia sts-da1-3036b 5 soldering ? recommended hand soldering condition temperature 380c max soldering time 5sec max * hand soldering must not be performed more than once. * since the silicone used in the encapsulating resin frame is soft, do not press on the encapsulating resin frame or resin are a. pressure can cause nicks, chip-outs, encapsulant delaminati on and deformation, and wire br eaks, decreasing reliability. * repairing should not be done after the leds have been soldered. it should be confirmed beforehand whether the characteristics of the leds wi ll or will not be damaged by repairing. * when soldering, do not apply stre ss to the led while the led is hot. * when using a pick and place machine, choose an appropriat e nozzle for this product. using a pick-and-place nozzle with a smaller diameter than the size of the led's em itting surface will cause damage to the emitting surface and may also cause the led not to illuminate. * when flux is used, it should be a ha logen free flux. ensure that the manufacturing process is not designed in a manner where the flux will come in contact with the leds. * during and/or after soldering an electric wire to the electrode, ensure that tension is not applied to the electric wire. this may cause the electrode to be damaged and/or redu ce the adhesive strength of the electrode to the package. * if soldering is used to join electric wires to the electr odes, the adhesive strength of the electrode to the package may be reduced depending on the substances that are found in the solder paste and/or the type of the wire cover that is used . ensure that there are no issues with the materials th at will be used in the chosen application prior to use.
nichia sts-da1-3036b 6 tray dimensions 19.7 7 24.7 297 210 210 145 29 35 1 ???? 42 ? * ( g unit: mm) tray size: 42pcs sts-da7-5788 nxxxj130x ? no. all dimensions shown are for refere nce only and are not guaranteed. ?? *
nichia sts-da1-3036b 7 packaging - tray pack nichia led sts-da7-5106 nxxxxxxx ?` seal ?? tray ? label ? label rohs nxxxxxxx xxxx led ******* nichia corporation 491 oka, kaminaka, anan, tokushima, japan type lot qty. ymxxxx-rrr pcs rohs nxxxxxxx xxxx led ******* rrr pcs type rank qty. nichia corporation 491 oka, kaminaka, anan, tokushima, japan ? no. ????????????`???? trays are shipped with desiccants in heat-sealed moisture-proof bags. ? desiccants ??K???`? moisture-proof bags are packed in cardboard boxes with corrugated partitions. ?? moisture-proof bag if not provided, it will not be indicated on the label. ******* is the customer part number. O??????? * ******* ?? ? for details, see "lot numbering code" in this document. * ??????????? * u???????n?go??`y? ?`???????y?????? * ??\H?y?B???y? * ?QH??n?????u?p?????? * products shipped on trays are packed in a moisture-proof bag. they are shipped in cardboard boxes to protect th em from external forces during transportation. using the original package material or equivalent in transit is recommended. do not expose to water. the box is not water-resistant. do not drop or expose the box to external forces as it may damage the products.
nichia sts-da1-3036b 8 lot numbering code lot number is presented by using the following alphanumeric code. ymxxxx - rrr y - year year y 2014 e 2015 f 2016 g 2017 h 2018 i 2019 j m - month month m month m 1 1 7 7 2 2 8 8 3 3 9 9 4 4 10 a 5 5 11 b 6 6 12 c xxxx-nichia's product number rrr-ranking by color coordinates, ranking by luminous flux, ranking by color rendering index
nichia sts-da1-3036b 9 derating characteristics nfdxj130b ? no. sts-da7-5789a derating1 0 500 1000 1500 2000 0 20 40 60 80 100 120 (53, 1800) (105, 726) duty 100 1000 10000 1 10 100 1800 2700 S allowable forward current ( ma ) `??y?-S temperature at measure point on a case vs allowable forward current S allowable forward current(ma) `??y? temperature at measure point on a case(c) ?`?` duty ratio(%) ?`?`-S duty ratio vs allowable forward current t a =25c
nichia sts-da1-3036b 10 optical characteristics NFDWJ130B ? no. sts-da7-5790 spectrum 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 ? relative illuminance(a.u.) directivity1 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 k??? spectrum k? relative emission intensity(a.u.) L wavelength(nm) ? directivity ? radiation angle 1 0.5 0 0.5 1 1150ma i fp = t a =25c 1150ma i fp = t a =25c * ??? rnn ???? the graphs above show the characteristics for rnn leds of this product. * ??? all characteristics shown are for refe rence only and are not guaranteed.
nichia sts-da1-3036b 11 optical characteristics NFDWJ130B ? no. sts-da7-5791 spectrum 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 ? relative illuminance(a.u.) directivity1 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 k??? spectrum k? relative emission intensity(a.u.) L wavelength(nm) ? directivity ? radiation angle 1 0.5 0 0.5 1 1150ma i fp = t a =25c 1150ma i fp = t a =25c * ??? r70 ???? the graphs above show the characteristics for r70 leds of this product. * ??? all characteristics shown are for refe rence only and are not guaranteed.
nichia sts-da1-3036b 12 optical characteristics NFDWJ130B ? no. sts-da7-5792 spectrum 0.0 0.2 0.4 0.6 0.8 1.0 350 400 450 500 550 600 650 700 750 ? relative illuminance(a.u.) directivity1 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 k??? spectrum k? relative emission intensity(a.u.) L wavelength(nm) ? directivity ? radiation angle 1 0.5 0 0.5 1 1150ma i fp = t a =25c 1150ma i fp = t a =25c * ??? r8000 ???? the graphs above show the characteristics for r8000 leds of this product. * ??? all characteristics shown are for refe rence only and are not guaranteed.
nichia sts-da1-3036b 13 forward current characteristics / temperature characteristics NFDWJ130B ? no. sts-da7-5793a tavf 30 35 40 45 50 -60 -40 -20 0 20 40 60 80 100 120 taiv 0.6 0.8 1.0 1.2 1.4 -60 -40 -20 0 20 40 60 80 100 120 vfif 100 1000 10000 30 35 40 45 50 1150 2700 relative luminous flux(a.u.) ??- ambient temperature vs relative luminous flux forward current(ma) ifiv 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 500 1000 1500 2000 2500 3000 relative luminous flux(a.u.) - forward current vs relative luminous flux forward current(ma) ?R- forward voltage vs forward current ??-?R ambient temperature vs forward voltage ?R forward volta g e(v) ?R forward voltage(v) ?? ambient tem p erature ( c ) ?? ambient temperature(c) t a =25c * ??? all characteristics shown are for refe rence only and are not guaranteed. t a =25c i fp =1150ma i fp =1150ma * ??? rnn ???? the graphs above show the characteristics for rnn leds of this product.
nichia sts-da1-3036b 14 forward current characteristics / temperature characteristics nfdxj130b ? no. sts-da7-5821a tavf 30 35 40 45 50 -60 -40 -20 0 20 40 60 80 100 120 taiv 0.6 0.8 1.0 1.2 1.4 -60 -40 -20 0 20 40 60 80 100 120 vfif 100 1000 10000 30 35 40 45 50 1150 2700 relative luminous flux(a.u.) ??- ambient temperature vs relative luminous flux forward current(ma) ifiv 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 500 1000 1500 2000 2500 3000 relative luminous flux(a.u.) - forward current vs relative luminous flux forward current(ma) ?R- forward voltage vs forward current ??-?R ambient temperature vs forward voltage ?R forward volta g e(v) ?R forward voltage(v) ?? ambient tem p erature ( c ) ?? ambient temperature(c) t a =25c * ??? all characteristics shown are for refe rence only and are not guaranteed. t a =25c i fp =1150ma i fp =1150ma * ??? r70 ???? the graphs above show the characteristics for r70 leds of this product.
nichia sts-da1-3036b 15 forward current characteristics / temperature characteristics nfdxj130b ? no. sts-da7-5974a tavf 30 35 40 45 50 -60 -40 -20 0 20 40 60 80 100 120 taiv 0.6 0.8 1.0 1.2 1.4 -60 -40 -20 0 20 40 60 80 100 120 vfif 100 1000 10000 30 35 40 45 50 1150 2700 relative luminous flux(a.u.) ??- ambient temperature vs relative luminous flux forward current(ma) ifiv 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 500 1000 1500 2000 2500 3000 relative luminous flux(a.u.) - forward current vs relative luminous flux forward current(ma) ?R- forward voltage vs forward current ??-?R ambient temperature vs forward voltage ?R forward volta g e(v) ?R forward voltage(v) ?? ambient tem p erature ( c ) ?? ambient temperature(c) t a =25c * ??? all characteristics shown are for refe rence only and are not guaranteed. t a =25c i fp =1150ma i fp =1150ma * ??? r8000 ???? the graphs above show the characteristics for r8000 leds of this product.
nichia sts-da1-3036b 16 forward current characteristics / temperature characteristics NFDWJ130B ? no. sts-da7-5794a taxy 0.34 0.35 0.36 0.37 0.38 0.33 0.34 0.35 0.36 0.37 -40c 25c 105c x ifxy 0.34 0.35 0.36 0.37 0.38 0.33 0.34 0.35 0.36 0.37 100ma 350ma 1150ma 1800ma 2700ma x y y 1150ma i fp = ??-? ambient temperature vs chromaticity coordinate -? forward current vs chromaticity coordinate t a =25c * ??? all characteristics shown are for refe rence only and are not guaranteed. * ??? rnn ???? the graphs above show the characteristics for rnn leds of this product.
nichia sts-da1-3036b 17 forward current characteristics / temperature characteristics NFDWJ130B ? no. sts-da7-5795a taxy 0.34 0.35 0.36 0.37 0.38 0.33 0.34 0.35 0.36 0.37 -40c 25c 105c x ifxy 0.34 0.35 0.36 0.37 0.38 0.33 0.34 0.35 0.36 0.37 100ma 350ma 1150ma 1800ma 2700ma x y y 1150ma i fp = ??-? ambient temperature vs chromaticity coordinate -? forward current vs chromaticity coordinate t a =25c * ??? all characteristics shown are for refe rence only and are not guaranteed. * ??? r70 ???? the graphs above show the characteristics for r70 leds of this product.
nichia sts-da1-3036b 18 forward current characteristics / temperature characteristics NFDWJ130B ? no. sts-da7-5796a taxy 0.34 0.35 0.36 0.37 0.38 0.33 0.34 0.35 0.36 0.37 -40c 0c 25c 105c x ifxy 0.34 0.35 0.36 0.37 0.38 0.33 0.34 0.35 0.36 0.37 100ma 1150ma 2700ma x y y 1150ma i fp = ??-? ambient temperature vs chromaticity coordinate -? forward current vs chromaticity coordinate t a =25c * ??? all characteristics shown are for refe rence only and are not guaranteed. * ??? r8000 ???? the graphs above show the characteristics for r8000 leds of this product.
nichia sts-da1-3036b 19 reliability (1) tests and results te s t reference standard test conditions te s t duration failure criteria # units failed/tested temperature cycle jeita ed-4701 100 105 -40c(30min)~25c(5min)~ 100c(30min)~25c(5min) 100cycles #1 0/10 high temperature storage jeita ed-4701 200 201 t a =100c 1000hours #1 0/10 temperature humidity storage jeita ed-4701 100 103 t a =60c, rh=90% 1000hours #1 0/10 low temperature storage jeita ed-4701 200 202 t a =-40c 1000hours #1 0/10 high temperature operating life t c =43c, i f =1800ma 1000hours #1 0/10 electrostatic discharges jeita ed-4701 300 304 hbm, 2kv, 1.5k ? , 100pf, 3pulses, alternately positive or negative #1 0/10 notes: measurements are performed after allowi ng the leds to return to room temperature. (2) failure criteria criteria # items conditions failure criteria forward voltage(v f ) i f =1150ma >initial value1.1 #1 luminous flux( v ) i f =1150ma nichia sts-da1-3036b 20 cautions (1) storage conditions temperature humidity time before opening aluminum bag 30c 90%rh within 1 year from delivery date storage after opening aluminum bag 30c 70%rh 168hours after opening the moisture-proof aluminum bag, the products should go through the soldering process within the range of the conditions stated above. unused remaining leds should be stored with silica gel desiccants in a hermetically sealed container, preferab ly the original moisture-proof bags for storage. although the leads or electrode pads (anode and cathode) of the product are plated with gold, prolonged exposure to a corrosive environment might caus e the gold plated the leads or electrode pads to tarnish. if unused leds remain, they must be st ored in a hermetically sealed container. nichia recommends using the origin al moisture-proof bag for storage. do not use sulfur-containing materials in commercial products. some materials, such as seals and adhesives, may contain sulfur . the contaminated plating of leds might cause an open circ uit. silicone rubber is recommen ded as a material for seals. bear in mind, the use of silicones may lead to silicone contamination of electrical contacts inside the products, caused by low molecular weight volatile siloxane. to prevent water condensation, please avoid large temperat ure and humidity fluctuations for the storage conditions. do not store the leds in a dusty environment. do not expose the leds to direct sunlight and/or an environment where the temperature is higher than normal room temperature. (2) directions for use when designing a circuit, the curre nt through each led must not exceed the absolute maximum rating. operating at a constant current per led is recommended. in case of operating at a constant voltage, circuit b is recommended . if the leds are operated with constant voltage using circui t a, the current through the leds may vary due to the variation in forward voltage ch aracteristics of the leds. (a) ... (b) ... this product should be operated using forward curre nt. ensure that the product is not subjected to either forward or reverse voltage while it is not in use. in particular, subjecting it to continuous reverse voltage may cause migration, which may cause damage to the led die. when used in displays that are not used for a long time, the main power supply should be switched off for safety. pulse width modulation (pwm) is recommended for dimm ing leds as color point changes with drive current. it is recommended to operate the leds at a current greater th an 10% of the sorting current to stabilize the led characteristic s. ensure that excessive voltages such as li ghtning surges are not applied to the leds. for outdoor use, necessary measures should be take n to prevent water, moisture and salt air damage. (3) handling precautions do not handle the leds with bare hands as it will contaminat e the led surface and may affect the optical characteristics: it might cause the led to be deformed and/or the wi re to break, which will cause the led not to illuminate. when handling the product with tweezers, be ca reful not to apply excess ive force to the resin. otherwise, the resin can be cut, ch ipped, delaminate or deform ed, causing wire-bond breaks and catastrophic failures. dropping the product may cause damage. do not stack assembled the products. fail ure to comply can cause the resin portion of the product to be cut, chipped, delaminated and/or deformed. it may cause wi re to break, leading to catastrophic failures.
nichia sts-da1-3036b 21 (4) design consideration volatile organic compounds that have been released from ma terials present around the leds (e.g. housing, packing, adhesive, secondary lens, lens cover, etc.) may penetrate the led lens and/or encapsulating resin. if the leds are being used in a hermetically sealed enviro nment, these volatile compounds ca n discolor after being exposed to heat and/or photon energy and it may greatly re duce the led light output and/or cause a color shift. in this case, ventilating the environment may improve the reduction in light output and/or color shift. perform a light-up test of the chosen application for optical evaluation to ensure that there are no issues, especially if the leds are planned to be used in a hermetically sealed environment. excessive forces on this product ca n cause the ceramic package to crack. it is recommended to use a holder when fixing this product to a chassis. it is recommended to use a thermal film or thermal grease between the product and a chassis for increased heat dissipation. (5) electrostatic discharge (esd) the products are sensitive to static electricity or surge voltage. esd can damage a die and its reliability. when handling the products, the following measures against electrostatic discharge are strongly recommended: eliminating the charge grounded wrist strap, esd footwear, clothes, and floors grounded workstation equipment and tools esd table/shelf mat made of conductive materials ensure that tools (e.g. soldering irons), jigs and mach ines that are being used are properly grounded and that proper grounding techniques are used in wo rk areas. for devices/equipment that mount the leds, protection against surge voltages should also be used. if tools or equipment contain insulating materials such as glass or plastic, the following measures against electros tatic discharge are strongly recommended: dissipating static charge with conductive materials preventing charge generation with moisture neutralizing the charge with ionizers (6) thermal management proper thermal management is an impo rtant when designing products with le ds. led die temperature is affected by led module thermal resistance and led spacing. please design products in a way that the led die temperature does not exceed the maximum junction temperature (t j ). the dice temperature of the products should be calculated, using the case temperature (t c ) of the product incorporated into the end-product, by the following equation. t j =t c +r jc ? w *t j =led junction temperature: c t c =case temperature: c r jc =thermal resistance from junction to t c measuring point: c/w w=input power(i f v f ): w tc point
nichia sts-da1-3036b 22 (7) cleaning the leds should not be cleaned with water, benzine, and/or thinner. if required, isopropyl alcohol (ipa) should be used. ot her solvents may cause premature failure to the leds due to the damage to the resin portion. the effects of such solvents should be verified prior to use. in addition, the use of cfcs such as freon is heavily regulated. when dust and/or dirt adheres to the leds, soak a cloth with is opropyl alcohol (ipa), then sque eze it before wiping the leds. ultrasonic cleaning is not recommended sinc e it may have adverse effects on the leds depending on the ultrasonic power and how led is assembled. if ultrasonic cleaning must be used, the customer is advise d to make sure the leds will not be damaged prior to cleaning. (8) eye safety in 2006, the international electrical commission (iec) published iec 62471:2006 photobiological safety of lamps and lamp systems, which added leds in its scope. on the other hand, the iec 60825-1:2007 laser safety standard removed leds from its scope. however, please be advised that some countries and regions have adopted standards based on the iec laser safety standard iec 60825- 1:20112001, which still includes leds in its scope. most of nichia's leds can be classified as belo nging into either the exempt group or risk group 1. high-power leds, that emit ligh t containing blue wavelengths, may be classified as risk group 2. please proceed with caution when viewing directly any leds driven at high current, or viewing leds with optical instruments which may greatly increase the damages to your eyes. viewing a flashing light may cause eye discomfort. when incorporating the led into your product, please be careful to avoid adverse effects on the human body caused by light stimulation. (9) others the leds described in this brochure are intended to be used for ordinary electronic equipmen t (such as office equipment, communications equipment, measurement instruments and household appliances). consult nichia's sales staff in advance for information on the applications in which exceptional quality and reliability are required, particularly when the failure or malfunction of the leds may directly jeopardize life or health (such as for airplanes, aerospace, submersibl e repeaters, nuclear reactor co ntrol system, automobiles, traffic control equipment, life support systems and safety devices). the customer shall not reverse engineer by disassembling or analysis of the leds without having prior written consent from nichia. when defective leds are found, the customer sh all inform nichia directly before disassembling or analysis. the specifications and appearance of th is product may change without notice; nichia does not guarantee the contents of this specification. both the customer and nichia will agree on the official specifications of supplied products before the volume production of a program begins.
|
